Refurbished Radiodetection CAT4+ & Genny4 Kit

SKU: 15
In Stock
Refurbished
A refurbished CAT4+ and Genny4 locating kit with 12-month warranty and 12-month calibration. Core CAT4 locating plus estimated depth in Genny mode with a suitable applied signal; no GPS usage logging. Carry bag is optional.

What's in the Box

  • 1 × refurbished Radiodetection CAT4+ locator.
  • 1 × refurbished Genny4 signal generator.
  • Genny direct connection lead, earth stake and magnet.
  • 12-month warranty and 12-month calibration.

The carry bag and rechargeable-battery/charger option are extras selected in the existing options panel.

Secure checkout

A refurbished CAT4+ and Genny4 locating kit with 12-month warranty and 12-month calibration. Core CAT4 locating plus estimated depth in Genny mode with a suitable applied signal; no GPS usage logging. Carry bag is optional.

A locator and signal generator that work together

The CAT follows a detectable signal; the Genny4 applies one to a suitable service. This gives you an active locating method alongside Power and Radio detection. Select direct connection, compatible clamp application or induction for the job, following the manufacturer instructions. An initial Avoidance-mode sweep does not replace the complete survey procedure.

CAT4+ & Genny4 kit
Representative image of the refurbished product.

Choose this kit for the functions you need

Core CAT4 locating plus estimated depth in Genny mode with a suitable applied signal; no GPS usage logging. Depth readings, where supported, are estimates and do not establish safe clearance for excavation.

Know what is included before adding extras

  • 1 × refurbished Radiodetection CAT4+ locator.
  • 1 × refurbished Genny4 signal generator.
  • Genny direct connection lead, earth stake and magnet.
  • 12-month warranty and 12-month calibration.

The carry bag and rechargeable-battery/charger option are extras selected in the existing options panel.

Build around the included equipment

For appropriate clamp application, add a compatible 100 mm Genny clamp or compare the used clamp offer. It connects to the transmitter, not directly to the CAT receiver.

For non-metallic pipes, a Standard 33 kHz sonde or S18A sonde provides a locatable point; check frequency, fittings and route clearance. A 60 m Flexrod or 120 m Flexrod pushes a suitable sonde. To apply a signal along a conductive rod instead, compare FlexiTrace 50 m and FlexiTrace 80 m.

Add the CAT-and-Genny carry bag if required; it is an optional selection for this refurbished kit.

Refurbished value with separate warranty and calibration

This offer includes 12-month warranty and 12-month calibration, reducing the initial purchase cost while providing clear seller reassurance. New stock may suit a new-only purchasing policy or a preference for unused equipment. Compare the new CAT4+ and Genny4 kit if those requirements apply.

Compare the locating kits

Already own a suitable signal generator? Compare the refurbished standalone CAT4+ instead.

Watch the manufacturer application demonstration

Radiodetection’s CAT4 and Genny4 streetlighting demonstration shows the family workflow, rather than every feature of this exact kit.

Operating instructions

Read the manufacturer operating instructions (V9) and the technical details in More Information. A quiet response is not evidence that an area is free of services.

Watch a manufacturer locating application

Radiodetection: locating streetlighting cables with C.A.T4 and Genny4. This manufacturer family demonstration shows a locating application with a Genny4; it does not demonstrate every feature or imply that a transmitter is included with a standalone locator.

Manufacturer documents