A used 100 mm Genny signal clamp for applying a transmitter signal to a suitable cable or pipe. It connects to a compatible Genny signal generator; the CAT receiver is separate. The clamp jaws must close around the service for correct use.

Used value for a specific signal-application task

This used clamp performs the same type of signal-application task as the corresponding new 100 mm Genny clamp. It is intended to couple the Genny signal to a suitable cable or pipe when clamp operation is appropriate. It does not measure current for electrical testing or act as a standalone locator.

Used 100 mm clamp — Representative image of the used product.

A used clamp for a compatible Genny system

This is a used 100 mm Genny clamp. It couples a compatible transmitter’s signal onto a suitable service, with a separate locator used to trace the signal. The jaws must close correctly around the service. For an unused accessory, compare the new 100 mm Genny clamp.

Choose the compatible CAT4 locator

Connect the clamp to a compatible Genny transmitter; use a receiver to trace the applied signal. For core route tracing, compare the new CAT4 or refurbished CAT4. For estimated depth in Genny mode, compare the new CAT4+ and refurbished CAT4+. If your team also needs usage and location records, compare the new gCAT4+ and refurbished gCAT4+. New or refurbished condition does not add a feature that the locator model lacks.

Build a compatible locating system

Match the transmitter, receiver, signal frequency and mechanical connection to the application. Use compatible equipment together and follow the manufacturer instructions and your site’s safe system of work.

Buying the locator and transmitter together?

Compare the new CAT4 and Genny4 kit with bag or refurbished CAT4 and Genny4 kit. For estimated depth, consider the CAT4+ and Genny4 kit; for usage and location records, consider the gCAT4+ and Genny4 kit. Review the included items first so you only add accessories you need.