New Radiodetection Tx10 signal transmitter

SKU: 10/TX10
In Stock
New

New Radiodetection Tx10 signal transmitter with 10 W maximum output. Apply a locating signal by direct connection, compatible clamp or induction; receiver and accessory compatibility still apply.

What's in the Box

  • TX10 Transmitter
  • Ground Stake
  • Direct Connect Leads
  • Earth Reel
  • Batteries
Secure checkout

Put a usable signal onto the target utility

The Tx10 applies a traceable signal to a suitable buried cable or conductive pipe. Direct connection, clamp application and induction provide different ways to establish the signal for a compatible receiver.

Radiodetection Tx10 signal transmitter representative product image
Representative Tx10 signal transmitter product image.

Select the frequency and output for the connection and service. More transmitter power does not guarantee a locating distance or remove the need to investigate signal distortion.

Match the receiver and locating task

Use RD7200 for general precision locating or RD8200 when its broader frequency and Current Direction functions suit the task. Current Direction requires a CD-capable receiver and the matching CD signal.

Direct connection, clamp and fault finding

The transmitter connection kit brings together a direct lead, earth reel, earth stake and magnet. A 100 mm transmitter clamp provides clamp signal application. The A-Frame requires both receiver and transmitter to support Fault Find.

Questions about this offer

Is this a receiver?

No. This is a signal transmitter. A compatible receiver detects the signal along the utility; it is a separate instrument.

Does higher output guarantee a deeper locate?

No. Results depend on the utility, connection, frequency, ground conditions, interference and receiver. Use an appropriate output and compare the response.

Can it support A-Frame fault finding?

Yes, with the appropriate fault-find signal, a compatible fault-find receiver and the A-Frame. Current Direction also requires a CD-capable receiver.

Tx10 transmitter connection guide

Radiodetection demonstrates fitting and removing Tx10 connection leads. Available controls and features vary by transmitter version; supplied accessories are listed above.

Watch on YouTube · Radiodetection

Manufacturer documents