New Radiodetection Tx10B signal transmitter

SKU: 10/TX10B
In Stock
New

New Radiodetection Tx10B signal transmitter with 10 W maximum output. Apply a locating signal by direct connection, compatible clamp or induction; receiver and accessory compatibility still apply. Supports iLOC remote control with a compatible paired locator.

What's in the Box

  • TX10B Transmitter
  • Ground Stake
  • Direct Connect Leads
  • Earth Reel
  • Batteries

More Info ↓

Secure checkout

Put a usable signal onto the target utility

The Tx10B applies a traceable signal to a suitable buried cable or conductive pipe. Direct connection, clamp application and induction provide different ways to establish the signal for a compatible receiver.

Radiodetection Tx10B signal transmitter representative product image
Representative Tx10B signal transmitter product image.

Select the frequency and output for the connection and service. More transmitter power does not guarantee a locating distance or remove the need to investigate signal distortion.

Match the receiver and locating task

Use RD7200 for general precision locating or RD8200 when its broader frequency and Current Direction functions suit the task. Current Direction requires a CD-capable receiver and the matching CD signal.

Direct connection, clamp and fault finding

The transmitter connection kit brings together a direct lead, earth reel, earth stake and magnet. A 100 mm transmitter clamp provides clamp signal application. The A-Frame requires both receiver and transmitter to support Fault Find.

iLOC with a compatible receiver

The Tx10B supports iLOC remote control from a compatible paired locator, such as the RD8200 or RD8100. The receiver must support iLOC; the RD7200 does not provide this remote-control function.

Questions about this offer

Is this a receiver?

No. This is a signal transmitter. A compatible receiver detects the signal along the utility; it is a separate instrument.

Does higher output guarantee a deeper locate?

No. Results depend on the utility, connection, frequency, ground conditions, interference and receiver. Use an appropriate output and compare the response.

Can it support A-Frame fault finding?

Yes, with the appropriate fault-find signal, a compatible fault-find receiver and the A-Frame. Current Direction also requires a CD-capable receiver.

Tx10 transmitter connection guide

Radiodetection tx 10 iloc unitPlay manufacturer video
Loads YouTube after you choose to play

Radiodetection demonstrates fitting and removing Tx10 connection leads. Available controls and features vary by transmitter version; supplied accessories are listed above.

Watch on YouTube · Radiodetection

Manufacturer documents