New Radiodetection 50 mm transmitter clamp

SKU: 10/TX-CLAMP-50
In Stock
New

Apply a compatible Tx transmitter signal to a suitable cable or pipe with the 50 mm transmitter clamp. Useful where direct metallic connection is unsuitable.

What's in the Box

  • 50 mm Radiodetection transmitter clamp.

More Info ↓

Secure checkout

Apply the locating signal by clamp

The 50 mm transmitter clamp applies a signal from the transmitter to a suitable cable or pipe. It is useful when an appropriate direct metallic connection cannot be made.

Radiodetection 50 mm transmitter clamp representative product image
Representative 50 mm transmitter clamp product image.

Choose the clamp for the conductor and available space, and follow the transmitter and clamp instructions. It is a transmitter accessory, distinct from a receiving clamp plugged into the locator.

Match the size and signal source

Use with a compatible Tx5 or Tx10 and a receiver that supports the signal frequency, such as RD7200 or RD8200. For a different diameter, compare the 50 mm, 100 mm, 130 mm and 215 mm transmitter clamps.

Questions about this offer

Does it connect to the receiver?

No. This is the transmitting clamp connected to the compatible transmitter. A locator clamp is a separate receiving accessory.

Does it replace safe electrical working procedures?

No. Follow the clamp/transmitter instructions and applicable safe working rules; the clamp is not a tool for handling exposed live conductors.

Manufacturer documents