Radiodetection RD510 Water Pipe Locator & Leak Detector

SKU: 10/RD510-RX
In Stock
New

RD510 acoustic receiver kit with control unit, ground sensor and headset for listening for leaks and tracing detectable sound from buried water pipes.

What's in the Box

  • RD510 handheld control unit with soft cover
  • Acoustic sensor and telescopic pole
  • Soft-ground spikes and hard-ground plate
  • Headset
  • Memory card and USB cable
  • Transit case
Secure checkout

RD510 acoustic receiver for water pipe leak investigations

RD510 acoustic receiver kit with control unit, ground sensor and headset for listening for leaks and tracing detectable sound from buried water pipes.

RD510 ground microphone and handheld control unit
Using the RD510 ground sensor on a hard surface.

Acoustic listening and active pipe tracing

For a leak survey, move the microphone along the suspected pipe route and compare the sound received at each point. The band-pass filter helps isolate the frequencies of interest when there is background noise. Choose the sensor contact for the surface, using the plate on hard ground or the spike where suitable in soft ground.

For an active trace, the Pulsed Water Transmitter introduces a detectable pulse through a suitable access point. Follow that pulse on the surface with the RD510. This can help where a plastic pipe is difficult to trace with a conventional electromagnetic locator.

Select by pipe pressure and equipment already on hand

The standard-pressure valve has a yellow identification band and a 4 bar maximum. The high-pressure valve has a red band and a 10 bar maximum. Measure the pressure at the intended connection and follow the manufacturer setup procedure.

For active tracing add the 4 bar transmitter kit or 10 bar transmitter kit. The receiver kit is also available as a complete dual-valve package.

Watch Radiodetection’s pipe-tracing demonstration.

RD510 operator with headset, ground sensor and transmitter in the field
Manufacturer example of RD510 field work. See the box contents for this offer.

Key specifications

Measurement methodGround acoustics
Receiver display7-inch colour touchscreen
Pressure configurationSelect the appropriate separate transmitter and valve
Site variablesPipe material, ground composition, surface contact and background noise

Questions about this model

Can it help with plastic water pipes?

Yes, where the ground microphone can detect leak noise or the pulse generated by the transmitter. Range depends on the site.

Which valve should I choose?

Base the selection on the measured pipe pressure and the valve rating. The valve ratings are maximum limits.

Do I need both units?

The acoustic receiver can listen for leak noise. Active pipe tracing uses the receiver and the Pulsed Water Transmitter together.

Manufacturer support

Manufacturer documentation and operating guidance