11mm x 100 metre Traceble Rod
11mm x 100 metre Traceable Rodding System
The CLS Traceable Rodding System has a copper wire in the rod which can be energised with a signal transmitter. The locator detects the frequency, allowing the entire buried utility to be traced and marked from above ground by one person.
The high quality CLS Trace Rodding Systems provide 2 solutions in one product. They can be used as a standard fibreglass rodding system for cable / draw rope installation and as a traceable rodding system to identify duct/pipe runs or locate blockages.
- Lower investment cost as the Trace Rod replaces two items of equipment
- Less equipment to carry on your vehicle and to site – saving space, weight and time.
To use as a trace rod push the rod along the duct as required or until a blockage or obstruction is met. Connect the positive side to the signal generator onto the rod terminal (at the point where it attaches to the reel). Connect the negative side to an earth stake (or other independent earth). The Trace Rod can then be traced along it’s complete length with a Cable Avoidance tool (CAT Receiver).
Suitable for use with most C.A.T and signal generator systems.
Highest quality 9mm or 11mm reinforced fibreglass rod complete with two 0.5mm copper trace wires.
UV inhibited coating.
Rugged steel construction, Zinc plated
Dimensions: 1000mm width x 1200mm high x 500mm depth
We will endeavour to deliver your order right away. We will normally send your order to you the next working day for stock items. We dispatch orders Monday to Friday (excluding UK public holidays). Standard delivery days are Monday through to Friday, but we can also deliver on Saturdays at an additional cost.
UK Mainland Standard Charges:
|Delivery Time||Shipping - (GBP)|
|Overnight (orders placed before 2.30pm||£12.95|
|We usually use Fedex for all UK Shipments|
We ship world wide. All orders are fulfilled at our distribution centre in York England within 3 business days